Установка клипонов Driven на Ninja 300 (English subtitles/CC)

(For English turn the CC on. For before and after pictures go to 10:55) Installing Driven Clip-ons DCLO37RBK 37mm with 1.5 inch risers. I tried both set ups - the neutral and the 10° down. I ran into minor clearance issues and decided to go for longer (50mm) brake lines. Revzilla store link:
(Select 37mm size) Time codes: 0:00 - Unpacking 0:54 - Two ways of installing: straight and minus 10 degrees 1:45 - Removing handle bar weights 2:50 - Removing left grip (using WD40 and compressed air) 3:37 - DON'T remove the throttle grip! 4:33 - Disassembling triple tree 5:00 - Installing Driven clipon raisers 5:50 - Drill a hole in the left clip-on 7:06 - Demonstrating the problem installing clipons on Ninja 300 ABS 9:12 - Same set up but with longer brake lines (needed for Ninja 300 ABS) 10:17 - Comparing clipons to the stock bars 10:52 - Comparing sitting position with Driven clipons and stock handle bars Клипоны Driven и Woodcraft - наиболее популярные модификации для Ниндзя-300. Здесь я рассказываю о своем опыте установке Driven в обоих вариантах - горизонтальном и с 10-градусным наклоном вниз на Ninja 300 ABS.